Share on Pinterest

We include products we think are useful for our readers. If you buy through links on this page, we may earn a small commission. Here’s our process.

The benefits of dermarolling

You may be wondering, “How in the world is inserting hundreds of little needles into your face relaxing? And why would anyone want to do that?” It sounds crazy, but microneedling has a ton of benefits, including:

  • reduced wrinkles and stretch marks
  • reduced acne scarring and skin discoloration
  • increased skin thickness
  • facial rejuvenation
  • enhanced product absorption

For anyone who’s looking for a way to tackle these concerns at home, microneedling might be your answer. Here’s what you need to know about this miraculous process.

Microneedling, often referred to as dermarolling or collagen induction therapy, is a cosmetic procedure in which thousands of tiny little needles are inserted into the surface of skin via a rolling or stamping device.

Dermarolling works by creating microscopic wounds which induce collagen and elastin production. If you didn’t know, collagen is the most abundant protein found in the human body and is responsible for holding together connective tissue like skin, muscles, tendons, cartilage, and bones.

This lovely protein is also what keeps us looking young and gorgeous. Unfortunately, it’s believed that collagen production slows down by about 1 percent per year after the age of 20, which translates to the big A word — aging.

Despite how terrifying dermarolling may seem, it’s actually considered a minimally invasive procedure with little to no downtime. However, the recovery process does depend largely on the length of the needles used. Obviously, the longer the needles, the deeper the wound — and that means the longer the recovery time.

This will depend largely on what you’re trying to accomplish. Since we’re all about simplicity, here’s a table summarizing what length should be used depending on what you’re trying to treat.

ConcernsNeedle length (millimeters)
shallow acne scars1.0 mm
deep acne scars1.5 mm
enlarged pores0.25 to 0.5 mm
postinflammatory hyperpigmentation (blemishes)0.25 to 0.5 mm
skin discoloration0.2 to 1.0 mm (start with the smallest)
sun damaged or sagging skin0.5 to 1.5 mm (a combination of both is ideal)
stretch marks1.5 to 2.0 mm (avoid 2.0 mm for home use)
surgical scars1.5 mm
uneven skin tone or texture0.5 mm
wrinkles0.5 to 1.5 mm

Note: Microneedling won’t help postinflammatory erythema (PIE), which is redness or pink blemishes. And be aware that derma rollers or microneedling instruments that are greater than 0.3 mm in length are not approved or cleared by the Food and Drug Administration.

Follow these steps precisely to avoid any hazards and unwanted infections.

Step 1: Disinfect your roller

Disinfect your derma roller by letting it soak in 70 percent isopropyl alcohol for approximately 5 to 10 minutes.

Step 2: Wash your face

Thoroughly cleanse your face using a gentle pH-balanced cleanser. If you’re using a derma roller with needles longer than 0.5 mm, you’ll also need to wipe down your face with 70 percent isopropyl alcohol before the rolling process.

Step 3: Apply numbing cream, if needed

Depending on your pain tolerance, you might need to apply an anesthetic cream. However, you’ll most certainly want some numbing cream for anything above 1.0 mm, since that needle length will draw blood via pinpoint bleeding.

If you use numbing cream, follow the instructions the manufacturer provides, and make sure to completely wipe it if off before you start rolling! Numb Master Cream 5% Lidocaine ($18.97) is a great option.

Step 4: Begin derma rolling

The technique is very important, so listen closely! Splitting up your face into sections makes the whole process easier. Here’s a visual of what that looks like:

Avoid rolling in the shaded area, which represents the orbital (eye sockets) area.

  1. Roll in one direction 6 to 8 times, depending on your skin tolerance and sensitivity, and make sure to lift the roller after each pass. So, roll in one direction. Lift up. Repeat.

Lifting the derma roller after each pass prevents the dreaded “track marks” that make you look like a cat clawed your face.

  1. After you roll in the same place 6 to 8 times, adjust the derma roller slightly, and repeat. Do this until you’ve covered the entire section of skin you’re treating.
  2. After rolling in one direction, it’s time to go back over the area you just rolled and repeat the process in the perpendicular direction. For example, say you finished rolling across your forehead vertically, now would be the time to go back and repeat that entire process horizontally.
  1. By the end of this entire procedure, you should have rolled over each area 12 to 16 times — 6 to 8 horizontally, 6 to 8 vertically.

Contrary to popular belief, we do not need to roll diagonally. Doing so creates an uneven pattern distribution with more stress on the center. If you decide to do this, please be careful and take extra precautionary measures.

Step 5: Wash your face with water

After you’re done microneedling, rinse your face with water only.

Step 6: Clean your derma roller

Clean your derma roller with dishwasher soap. Create a soapy water mix in a plastic container, then swish around the roller vigorously, making sure the roller doesn’t hit the sides. The reason we use detergents like dish soap directly after rolling is because alcohol doesn’t dissolve the proteins found in skin and blood.

Step 7: Disinfect your roller

Disinfect your derma roller again by letting it soak in the 70 percent isopropyl alcohol for 10 minutes. Put it back in its case, give it a kiss, and store it somewhere safe.

Step 8: Continue your basic skin care routine

Follow up derma rolling with a basic skin care routine. That means no chemical exfoliates or active ingredients like benzoyl peroxide, salicylic acid, tretinoin, etc.

How often you derma roll also depends on the length of needles you’ll be using. Below is the maximum amount of times you can use a derma roller within a given time frame.

Needle length (millimeters)How often
0.25 mmevery other day
0.5 mm1 to 3 times a week (starting with less)
1.0 mmevery 10 to 14 days
1.5 mmonce every 3 to 4 weeks
2.0 mmevery 6 weeks (avoid this length for home use)

Use your best judgment here, and make sure your skin is completely recovered before starting another session!

Rebuilding collagen is a slow process. Remember it takes the skin a fair amount of time to regenerate itself.

To take your results to the next level, use products that focus on hydrating, healing, and increasing collagen production. The single best thing you can do post-rolling is to use a sheet mask.

The Benton Snail Bee High Content Essence ($19.60) is packed with amazing ingredients for collagen induction, anti-aging, even skin tone, and barrier function.

Not into sheet masks? Look for serums or products with:

Here’s a list of product recommendations that include the ingredients listed above:

If you choose to use vitamin C (ascorbic acid), take it easy! Its inherently low pH may irritate your skin. Instead, load up on it a few days before a microneedling session. Keep in mind that it only takes 3 daily applications of 20 percent ascorbic acid to saturate the skin with vitamin C.

After rolling, the skin may:

  • be red for a couple hours, sometimes less
  • feel like a sunburn
  • swell initially (very minor)
  • feel like your face is pulsing and the blood is circulating

People often mistake the minor swelling they experience for overnight success, but the plumping effect you see initially will subside within a few days. But like mentioned earlier, repeated rolling does have permanent results!

There will be some minor erythema (redness) for about two or three days, and the skin might start peeling. If this does occur, do not pick at it! The peeling will fall off naturally as time passes.

Derma rollers come with either stainless steel or titanium needles. Titanium is more durable because it’s a stronger alloy than stainless steel. This means the needles will last longer and the sharpness won’t blunt as quickly.

However, stainless steel is inherently more sterile. It’s also sharper and blunts more quickly. Stainless steel is what medical professionals, tattoo artists, and acupuncturists use. But for all intents and purposes, both types will get the same job done.

Derma rollers can be found online. You don’t need to overcomplicate things and get an expensive one. The cheaper ones will work just fine. Some companies also offer package deals, offering both roller and serums, although their products may be pricier than purchasing everything separately.

There’s very well documented research showing that people can achieve major improvement in acne scarring or wrinkling in as little as two to three sessions using 1.5 mm monotherapy. Of course, continued use delivers better results. But the researchers found that the results after three sessions remain permanent even six months after the last treatment was concluded.

To see how these results worked on others, watch the video below:

This shows what the gradual improvement of three 1.5 mm sessions can do. Remember, if you do try dermarolling, never do it on active acne! If you have any hesitations or questions, consult your skin care professional before moving forward.

This post, which was originally published by Simple Skincare Science, has been edited for clarity and brevity.

f.c. is the anonymous author, researcher, and founder of Simple Skincare Science, a website and community dedicated to enriching the lives of others through the power of skin care knowledge and research. His writing is inspired by personal experience after spending nearly half his life with skin conditions like acne, eczema, seborrheic dermatitis, psoriasis, malassezia folliculitis, and more. His message is simple: If he can have nice skin, so can you!