Balloon Valvuloplasty Health Article

Definition

Balloon valvuloplasty, also called percutaneous balloon valvuloplasty, is a surgical procedure used to open a narrowed heart valve. The procedure is sometimes referred to as balloon enlargement of a narrowed heart valve.

Purpose

Balloon valvuloplasty is performed on children and adults who have a narrowed heart valve, a condition called stenosis. The goal of the procedure is to improve valve function and blood flow by enlarging the valve opening. It is sometimes used to avoid or delay open heart surgery and valve replacement.

There are four valves in the heart—the aortic valve, pulmonary valve, mitral valve, and tricuspid valve—each at the exit of one of the heart's four chambers. These valves open and close to regulate the blood flow from one chamber to the next and are vital to the efficient functioning of the heart and circulatory system. Balloon valvuloplasty is used primarily to treat pulmonary, mitral, and aortic valves when narrowing is present and medical treatment has not corrected or relieved the related problems. With mitral stenosis, for example, medical solutions are typically tried first, such as diuretic therapy (reducing excess fluid), anticoagulant therapy (thinning the blood and preventing blood clots), or blood pressure medications. Valvuloplasty is recommended for those patients whose symptoms continue to progress even after taking such medications for a period of time.

Valvular stenosis can be a congenital defect (develops in the fetus and is present at birth) or can be acquired, that is to stem from other conditions. Mitral valve stenosis in adults, for example, is rarely congenital and is usually acquired, either a result of having rheumatic fever as a child or developing calcium obstruction in the valve later in life. Pulmonary stenosis is almost entirely congenital. Aortic stenosis usually does not produce symptoms until the valve is 75% blocked; this occurs over time and is consequently found in people between the ages of 40 and 70. Tricuspid stenosis is usually the result of rheumatic fever; it occurs less frequently than other valve defects.

Childhood symptoms of valve narrowing may include heart dysfunction, heart failure, blood pressure abnormalities, or a murmur. Adult symptoms will likely mimic heart disease and may include blood pressure abnormalities, shortness of breath, chest pain (angina), irregular heart beat (arrhythmia), or fainting spells (syncope). Electrocardiogram (EKG), x ray, and angiography (a special x-ray examination using dye in the vascular system) may be performed to identify valvular heart problems. Depending on the severity of symptoms, cardiac catheterization may also be performed to examine heart valve function prior to recommending a surgical procedure. Valvular angioplasty is performed in children and adults to relieve stenosis. While it offers relief, it does not always cure the problem, particularly in adults, and often valvotomy (cutting the valve leaflets to correct the opening) or valve replacement is necessary at a later date.

Demographics

Congenital heart-valve disease occurs in one of every 1,000 newborns and is thought to be caused by inherited factors. In 2–4% of valve problems, health or environmental factors affecting the mother during pregnancy are believed to contribute to the defect. Pulmonary valve stenosis represents about 10% of all congenital heart problems. About 5% of all cardiac defects are stenosis of the aortic valve. Valve abnormalities are diagnosed in children and adults of both sexes; 80% of adult patients with stenosis are male, most adults with mitral stenosis are women who had rheumatic fever as a child. Tricuspid stenosis is rarely found in North America and Europe.

Description

In balloon valvuloplasty, a thin tube (catheter) with a small deflated balloon at its tip (balloon-tipped catheter) is inserted through the skin in the groin area into a blood vessel, and then is threaded up to the opening of the narrowed heart valve. The balloon is inflated to stretch the valve open and relieve the valve obstruction.

The procedure, which takes up to four hours, is performed in a cardiac catheterization laboratory that has a special x-ray machine and an x-ray monitor that looks like a regular TV screen. The patient will be placed on an x-ray table and covered with a sterile sheet. An area on the inside of the upper leg will be washed and treated with an antibacterial solution to prepare for the insertion of a catheter. The patient is given local anesthesia to numb the insertion site and will usually remain awake, able to watch the procedure on the monitor. After the insertion site is prepared and anesthetized, the cardiologist inserts a catheter into the appropriate blood vessel, then passes the smaller balloon-tipped catheter through the first catheter. Guided by the xray monitor that allows visualization of the catheter in the blood vessel, the physician slowly threads the catheter up into the coronary artery to the heart. The deflated balloon is carefully positioned in the opening of the valve that is being treated, and then is inflated repeatedly, which applies pressure to dilate the valve. The inflated balloon widens the valve opening by splitting the valve leaflets apart. Once the valve is widened, the balloon-tipped catheter is removed. The other catheter remains in place for six to 12 hours because, in some cases, the procedure must be repeated. A double-balloon valvuloplasty procedure is often performed on certain high-risk patients because it is considered more effective in restoring blood flow.